Gloves — Cut Resistant
90% reinforced fiber + 10% PVC
Medium weight fingerless latex dotted glove.
Extra density blended yarn.
Offers exceptional cut protection.
Good dexterity and comfort to the user.
Ideal to handle both large and small hazardous components.
Dotted both sides.
EN388: 2016
Level 1 - Abrasion
Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
Level 4 - Tear Resistance
Level X - Puncture
Level B - ISO 13997 Cut Resistance
100% reinforced fiber
Lightweight cut resistant glove.
Exceptional dexterity for safe handling of the smallest components.
Extremely successful used as a glove liner in conjunction with traditional
work gloves.
Used this way it can provide additional protection should the outer glove
incur laceration.
EN388: 2016
Level 1 - Abrasion
Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
Level 4 - Tear Resistance
Level X - Puncture
Level A - ISO 13997 Cut Resistance
100% reinforced fiber
Medium weight glove.
Extra density yarn.
High level cut protection without the loss of dexterity
Comfortable for the wearer.
Ideal where there is a requirement to handle both large and small
hazardous components.
EN388: 2016
Level 1 - Abrasion
Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
Level 4 - Tear Resistance
Level X - Puncture
Level B - ISO 13997 Cut Resistance
90% reinforced fiber + 10% PVC
Medium weight glove.
Extra density yarn.
High level cut protection without the loss of dexterity
Comfortable for the wearer.
Ideal where there is a requirement to handle both large and small
hazardous components.
EN388: 2016
Level 1 - Abrasion
Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
Level 4 - Tear Resistance
Level X - Puncture
Level B - ISO 13997 Cut Resistance
20% reinforced fiber + 80% Latex
Reinforced knitted glove fully latex coated.
Excellent all-round protection.
High cut resistance.
Offers excellent grip.
EN388: 2016
Level 3 - Abrasion
Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
Level 4 - Tear Resistance
Level 4 - Puncture
Level D - ISO 13997 Cut Resistance
40% reinforced fiber + 60% Latex
Reinforced knitted glove latex coated palm
High cut resistancy.
Comfortable, allows hand to breathe through back.
Excellent grip.
EN388: 2016
Level 3 - Abrasion
Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
Level 4 - Tear Resistance
Level 4 - Puncture
Level D - ISO 13997 Cut Resistance
Cut B amber cut protection
13g HPPE plus nylon liner
Black nitrile coated palm
Excellent dexterity and comfort
Construction industry, automotive industry, electrical industry and handling materials with sharp edges
EN388: 2016
Level 4 - Abrasion
Level X - Cut Resistance
Level 4 - Tear Resistance
Level 2 - Puncture
Level B - ISO 13997 Cut Resistance
14" (35cm) Reinforced sleeve with thumb slot.
100% reinforced fiber
Excellent cut resistance.
Soft and comfortable against the arm during use.
Extremely lightweight elasticated style allows the sleeve to
remain in place during the most rigorous tasks.
Thumb slot is added to further ensure that the product remains
in place.
Ideal in industries where laceration risks to the arms are prominent.
Sold as singles.
EN388: 2016
Level 1 - Abrasion
Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
Level 4 - Tear Resistance
Level X - Puncture
Level B - ISO 13997 Cut Resistance
Kutstop system
15g HPPE plus glass fibre and spandex liner
Black nitrile coated palm
Excellent dexterity and comfort
Ideal for the construction industry, automotive industry, electrical industry and handling glass or sheet metal
EN388: 2016
Level 4 - Abrasion
Level X - Cut Resistance
Level 4 - Tear Resistance
Level 4 - Puncture
Level C - ISO 13997 Cut Resistance
18" (45cm) Reinforced sleeve with thumb slot.
100% reinforced fiber
Excellent cut resistance.
Soft and comfortable against the arm during use.
Extremely lightweight elasticated style allows the sleeve to
remain in place during the most rigorous tasks.
Thumb slot is added to further ensure that the product remains
in place.
Ideal in industries where laceration risks to the arms are prominent.
Sold as singles.
EN388: 2016
Level 1 - Abrasion
Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
Level 4 - Tear Resistance
Level X - Puncture
Level B - ISO 13997 Cut Resistance
Cut resistant Nylon/Spandex glove.
Nitrile micro foam palm coating.
Dexterity with comfort.
EN388: 2016
Level 4 - Abrasion
Level X - Cut Resistance
Level 4 - Tear Resistance
Level 3 - Puncture
Level B - ISO 13997 Cut Resistance
High cut resistance.
Nitrile micro foam palm coating.
Dexterity with comfort.
EN388: 2016
Level 4 - Abrasion
Level X - Cut Resistance
Level 4 - Tear Resistance
Level 2 - Puncture
Level D - ISO 13997 Cut Resistance
65% UHMWPE(Ultra high molecular weight polyethylene) + 35%PU
13 Gauge Seamless liner.
PU coating, palm coated.
High quality cut resistance.
Excellent dexterity.
EN388: 2016
Level 4 - Abrasion
Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
Level 4 - Tear Resistance
Level 3 - Puncture
Level C - ISO 13997 Cut Resistance
HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass Fibre 21.3%, Spandex 7.8% Liner.
100% Nitrile rubber coating.
Ventilated back.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 2 - Puncture Resistance
Level C - TDM Cut Resistance (ISO 13997)
HPPE 47.4%, Polyester 20.1%, Glass Fibre 17.2%, Steel 14%, Spandex 1.3%.
Food Safe and washable.
Extremely high cut protection.
Suitable for general food preparation and areas where high cut protection is needed.
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 2 - Puncture Resistance
Level F - TDM Cut Resistance (ISO 13997)
18 Gauge knit
Grey PU palm coating
UHMWPE liner
Comfortable ergonomic fit
EN388: 2016
Level 4 - Abrasion
Level X - Cut Resistance
Level 4 - Tear Resistance
Level 2 - Puncture
Level E - ISO 13997 Cut Resistance
Foodsafe (Except for fatty foods)
18 Gauge knit
Grey nitrile palm coating
HPPE liner
Comfortable ergonomic fit
EN388: 2016
Level 4 - Abrasion
Level X - Cut Resistance
Level 4 - Tear Resistance
Level 2 - Puncture
Level F - ISO 13997 Cut Resistance
Foodsafe (Except for fatty foods)
100% Para-Aramid Liner.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 1 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 2 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
EN ISO 11612: 2015
A1 - Limited Flame Spread (Method A)
F2 - Contact Heat (250C for between 10 to 15 Seconds)
100% Para-Aramid Liner.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 1 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 2 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
EN ISO 11612: 2015
A1 - Limited Flame Spread (Method A)
F2 - Contact Heat (250C for between 10 to 15 Seconds)
100% Para-Aramid Liner.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 1 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 2 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
EN ISO 11612: 2015
A1 - Limited Flame Spread (Method A)
F2 - Contact Heat (250C for between 10 to 15 Seconds)
100% Para-Aramid Liner.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 1 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 2 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
EN ISO 11612: 2015
A1 - Limited Flame Spread (Method A)
F2 - Contact Heat (250C for between 10 to 15 Seconds)
100% Para-Aramid Liner.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 1 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 2 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
EN ISO 11612: 2015
A1 - Limited Flame Spread (Method A)
F2 - Contact Heat (250C for between 10 to 15 Seconds)
100% Para-Aramid Liner.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 1 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 2 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
EN ISO 11612: 2015
A1 - Limited Flame Spread (Method A)
F2 - Contact Heat (250C for between 10 to 15 Seconds)
13 Gauge Liner.
20% UHMW PE+ 80% rubber
100% TPE Fully Injection coating.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 2 - Puncture Resistance
Level C - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection